The Roof Restoration Process
Pressure Wash, Primer Sealer & Membrane Coating - Trusted Quality Dulux Products

Across South East Queensland and the Sunshine Coast, heat, UV exposure, heavy downpours, and coastal conditions gradually wear down roof surfaces. When a roof is weathered, faded, or carrying biological growth—but structurally sound—a full roof restoration can refresh its look and protection without the cost of a full roof replacement.
At Rudd Family Builders & Solar, our restoration process follows a clear, step-by-step sequence: pressure washing, primer sealer application, and a protective paint membrane using Dulux systems backed by a 10-year warranty, where eligible under manufacturer terms and system specification.
Step 1: Pressure Washing & Surface Preparation
Every lasting roof restoration starts underneath the coating. If dirt, moss, lichen, algae, or loose flaking material is left behind, even a premium membrane won’t bond properly.
- Repairs; replacement of any broken tiles or rusted screws and adjusting slipped tiles.
- Thorough Cleaning: High-pressure washing removes built-up grime, biological growth, and loose surface material so the substrate is clean and sound.
- Repairs & Safety: Before and during prep, the roof should be checked for underlying issues that cleaning alone won’t fix—such as damaged or slipped tiles, pointing or flashing faults, or older materials requiring specific safety controls.
- Runoff & Drain Care: In Queensland, care must be taken with wastewater and debris under the Environmental Protection Act 1994 so contaminants do not enter stormwater drains or waterways, and gutters/downpipes are kept clear.


Step 2: Applying the Primer Sealer
Once the roof is clean, dry, and properly prepared, the primer sealer goes down. Think of this layer as the foundation that locks the system to the roof surface.
- Sealing & Adhesion: A primer sealer helps bind to porous or weathered surfaces and creates a consistent base for the coating layers above it.
- Supporting System Performance: Using the matching primer specified for the coating system helps ensure proper adhesion and film integrity across the roof.
Step 3: Applying the Dulux Paint Membrane
The final stage is applying the Dulux paint membrane, which provides weather protection, colour renewal, and long-term durability across the roof surface.
- Flexible, Protective Finish: Membrane coatings are designed to form a durable protective barrier over the primed roof surface, helping protect against Queensland sun, rain, and weathering.
- 10-Year Warranty Coverage: We use Dulux products that carry a 10-year warranty. As with manufacturer warranties, coverage applies to the specified system and material terms when installed correctly and maintained as required—and sits alongside your rights under Australian Consumer Law.


Protecting Your Roof & Warranty After Restoration
A quality restoration sets your roof up well, and simple upkeep helps keep it looking sharp and compliant with care requirements:
- Clear Gutters & Valleys: Keep leaves and debris moving so water drains cleanly off the roof.
- Trim Overhanging Branches: Reducing overhanging foliage helps limit shade, organic debris, and roof pests.
- Follow Care & Inspection Guidance: Periodic visual checks—especially after severe SEQ storms—and following Dulux care guidance help preserve your roof’s finish and warranty conditions.
Planning a Roof Restoration in SEQ or on the Sunshine Coast?
If your roof is looking tired or weathered and you’d like a clear assessment for your home, speak with Rudd Family Builders & Solar (Martin is a licensed builder; QBCC Licence #15485031, CAE Solar Pty Ltd).
- Phone: 07 5477 0610
- Email:
info@ruddfamily.com.au - Address: 1/3 Packer Rd, Baringa QLD 4551







