QBCC Licensed & Insured Builder
From broken tiles and repointing to full deep-clean and membrane coating, builder-led, QBCC licensed & insured.
Understanding whether you need targeted repairs or a full restoration helps ensure you get the right outcome for your roof.
Option A
Best when:
Your roof is generally sound but has specific issues—broken tiles, failing pointing, minor leaks, localised rust, or loose fasteners.
Fixes problems and improves weather tightness without full cosmetic renewal.

Option B
Best when:
Your roof looks tired or faded, has widespread lichen or moss, multiple small issues, or you want a uniform "like-new" finish.
The roof is repaired, thoroughly cleaned, sealed, and finished with a quality membrane coating system for a "like-new" appearance.
Targeted repairs to fix specific issues and restore weather tightness:
Replace broken, cracked, or slipped
tiles
Re-secure loose tiles where required
Ridge capping repairs—re-bedding where mortar has failed
Re-pointing using flexible pointing compound to reduce cracking
Valley and flashing checks—repair or replace as needed
Identify and address leak points around penetrations
If your roof is structurally sound with only isolated damage—a few broken tiles, minor pointing failure, or a single leak point—targeted repairs can restore function without the cost of a full restoration.
Repairs + deep clean + membrane coating for a complete "like-new" finish.
Full condition assessment of tiles, ridge capping, valleys, and flashings
All necessary repairs—broken tiles, ridge work, flashings—completed before coating
Professional high-pressure clean to remove grime, lichen, moss, and loose coatings
Mould/lichen/algae treatment where needed to help reduce regrowth
Surface stabilised and primed to ensure proper coating adhesion
High-quality acrylic elastomeric membrane applied for flexibility and durability
Quality check and site clean-up
Uniform finish and refreshed appearance
Added protective layer over prepared surface
Helps extend roof service life
COLORBOND® steel only for sheet replacements—no cheaper imported substitutes.
Targeted repairs using quality materials:
Replace rusted or damaged sheets using COLORBOND® steel only
Replace worn roof screws, fasteners, and deteriorated washers
Repair or replace flashings at penetrations and transitions
Localised rust preparation and protection (scope-dependent)

Repairs + deep clean + membrane coating for a complete "like-new" finish.
Sheets, laps, fasteners, flashings, and penetrations thoroughly checked
Sheets, fasteners, and flashings replaced as needed with COLORBOND® steel
Professional cleaning appropriate to metal roofing surfaces
Rust-prone areas primed to prevent future corrosion
Roof coating system applied for a refreshed, uniform finish
Quality check and complete site clean-ups
A white roof finish is commonly chosen in SEQ for its clean, fresh appearance and heat-reflective benefits. This can help reduce cooling costs in our subtropical climate.
Roof work in South-East Queensland is completed in line with:
Queensland building regulatory framework
National Construction Code (NCC)
as adopted in Queensland
QBCC requirements—licensing and insurance obligations
Any relevant
local council requirements where applicable
Some work is straightforward maintenance and repair. However, larger scopes may trigger permit requirements:
• Larger replacement areas
• Structural elements
• Significant changes to roof design
• Drainage impacts
Martin will confirm what applies to your specific roof and manage any required permits, planning, or approvals.
From inspection to handover—clear steps, professional execution.
Thorough assessment of your roof condition
Repairs-only vs full restoration recommendations
Clear pricing and realistic scheduling
All repair work completed to a high standard
Membrane system applied (if selected)
Quality handover and site clean-up
SEQ weather conditions can affect roof work scheduling. We plan around forecasts to ensure quality results—roof coatings and membrane systems need appropriate conditions to cure properly.
Book a roof inspection with Martin. He'll assess your roof's condition and recommend the right approach for your situation—no obligation.
SERVICE AREAS
Gympie Region
Sunshine Coast
Brisbane
Moreton Bay
The Rudd Family brings 160+ years of building heritage together with 16+ years of solar installation experience.
The Rudd Family are part of an unbroken 6 generation line of continuous family builders since 1862
Martin has been building in the UK & Queensland for over 3 decades
Martin has been designing and installing solar systems since 2010
Martin's company is fully QBCC insured (15485031)
Martin handles design, permits, approvals, trades and certification. One point of contact.
Hi
Thank you so much for your recent enquiry with Rudd Family Builders & Solar — we’d love the opportunity to help with your project.
Whether you’re looking at solar and battery solutions, renovations, extensions, new builds, outdoor living projects, or a complete transformation of your home, our goal is to make the process straightforward, professional, and stress-free from start to finish.
As a local, family-run business established 22+ years , we pride ourselves on delivering honest advice, quality workmanship, and exceptional customer service. We understand that every project is important, and we genuinely care about achieving the best possible outcome for our clients, we are big enough to deliver any size project small enough to care.
One of our consultants will be in touch shortly to arrange a chat or a visit so we can better understand your needs and discuss the best options available to you.
In the meantime, feel free to contact us anytime with questions or ideas you’d like to explore further.
You’re also welcome to:
• Visit our website
• Read our customer reviews
• Or visit our showroom in Aura Business Park
A little about us…
Rudd Family Builders & Solar combines over 16 years of solar industry experience with 35 years of building and renovation expertise.
Our building division has a long-standing reputation for quality craftsmanship, reliability, and creating beautiful, functional spaces that families can enjoy for years to come.
Over the years, we’ve built a strong reputation through hard work, attention to detail, and treating our customers the way we would want our own family treated.
We’re proud to have:
• Over 180 five-star Google reviews with a rating of 5 stars
• 4.9 SolarQuotes rating
• Recognition in the TOP 5% of Solar Installers in Australia by SolarQuotes
• A trusted local reputation for quality building and renovation work across the Sunshine Coast & Brisbane region.
We’re incredibly proud of these achievements because they reflect the care, professionalism, and service we aim to provide every single client.
Whether your goal is to:
• Reduce your energy bills
• Add battery storage and energy security
• Renovate or improve your home
• Create better outdoor living spaces or add a Granny flat
• Increase the value and functionality of your property
• Modernise your home with quality building solutions
• Or work toward greater energy independence
—we’re here to guide you through the process with practical advice, tailored solutions, and clear communication every step of the way.
Our experienced team can assist with:
• Solar systems and battery storage
• Energy efficiency and feed-in tariff advice
• Renovations and extensions
• Outdoor living and structural improvements
• Project planning and scope of works
• Professional quoting and transparent communication throughout your project
Thanks again for reaching out to us. We genuinely appreciate the opportunity and look forward to speaking with you soon.
Lisa Rudd
Administration Manager
Rudd Family Builders & Solar
1/3 Packer Road
Baringa QLD 4551
07 5477 0610
0417 907 807
admin@ruddfamily.com.au
www.ruddfamily.com.au
Rudd Family Building & Solar is a family-run team delivering quality builds and smart solar solutions you can trust.